COMPACT 3 POINT LINKAGE SAND SCREENING MACHINES
The ORCA
q
q
Sand and litter are loaded by a series of nylon paddles onto a mesh frame 
that functions also as sifter. They are then conveyed upwards and 
discharged on a transverse moving sifter. 
From this sifter, litter is transferred to the rear collection basket 
Once the basket is full it is lifted and tipped into the top collection hopper, 
from there it is tipped either onto the ground for collection or directly into a 
truck or trailer for transporting away. 
q
Technical and Operating Specificaions

Machine width
1800mm
Height
1600mm
Length
1530mm
Weight
620Kg
Working Depth
from 0 to 150mm

The BALENA
The Balena is the largest of the compact three point linkage range of beach 
cleaners and has a working width of 1600mm. The heavy duty robust 
frame is hot dipped galvinized and painted to withstand the harsh working 
environment. 
Sand and debris is lifted onto the transverse sifters by nylon paddles, the 
efficient sifting motion allows the sand to fall back to the ground while the
 unwanted rubbish is collected at the back of the unit. 
All exposed parts are hot dip galvanized and painted. 
Working capacity is from 7500 to 15000 m2/hr 
Technical and Operating Specificaions

Machine width
1800mm
Height
1770mm
Length
1830mm
Weight
740Kg
Working Depth
from 0 to 150mm

The CERNIA
The Cernia is a beach cleaner that is well suited to operate over a variety 
of beach sizes with varying quantities of rubbish and debris to be removed.
Because it can be operated using a tractor of between 16 to 20 Hp, it 
makes a very economical option for your cleaning requirements. 
The Cernia also has a working capacity of 7000 Sq/Mtr per Hr. 
Chassis is completely hot dip galvanized and painted.
Technical and Operating Specificaions
Working width
1200mm
Height
870mm
Length
1050mm
Weight
110Kg
Working Depth
from 0 to 150mm
The MANTA
The Manta has an innovative debris load system, which consists of two 
vertical reciprocating sieves that dramatically reduce operating stresses 
on the machine. Improving efficiency and reducing wear and tear.
The Machine is suitable for smaller tractors from 35 Hp and the chassis is 
completely hot dip galvanized and painted
Working capacity of the Manta is 12000 Sq/Mtr per Hr.
Technical and Operating Specificaions
Machine width
1600mm
Height
1400mm
Length
1040mm
Weight
280Kg
Working Depth
from 0 to 150mm
Beachcleaners International Pty Ltd
Powered by BAM Creative